1 USER GUIDE 1-PORT 60 GHZ WIRELESSHD KIT Model: 29670
9 Step 3 Connect both power adapters of the Transmitting and Receiving units to outlets. Step 4 Turn on the power of both the Transmitter
10 Step 5 After you have finished the above set up steps, the units will be ready to transmit media. You can power on your source and display devic
11 The following are some things you can try if you are not getting any or getting poor picture and sound. Try moving the units closer together ma
12 Standards WirelessHD, HDMI(V1.3 with Deep color) Frequency 60 GHz Input/ Output Interface HDMI interface Antenna Type 36 Antenna Array (Integrate
13 VIDEO FORMAT Auto detect 17 modes TV mode Deep Color Vertical Refresh Rate Resolution 23.94 / 24 Hz 50 Hz 59.94 / 60 Hz640X480I ● X X ● 640X
14 AUDIO FORMAT Smple rate (256 Fs) 32 kHz 44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz LPCM 2ch ● ● ● ● ● ● ● LPCM 8ch ● ● ● ●
15 FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment sh
16 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience
17 ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this man
18
1 Introduction...
19 For more information on this product or to check for updated drivers, manuals or frequently asked questions
2 Thank you for purchasing the TruLink™ 1-Port 60 GHz WirelessHD Kit. The TruLink™ 1-Port 60 GHz WirelessHD Kit enables high definition wireless tran
3 CONVENIENT Supports wireless transmission up to 33ft/10M in-room (longer distances may be supported depending on the environment)* Plug-and-pla
4 (1) 60GHz WirelessHD Transmitting Unit (1) 60GHz WirelessHD Receiving Unit (2) HDMI Cables (2) Power Adapters Remote Control Mounting B
5 TRANSMITTER UNIT RECEIVER UNIT LED Indicators LED Color Behavior Indication Power Green On The LED will illuminate when the power is con
6 TRANSMITTER AND RECEIVER SIDE PANEL VIEW TRANSMITTER AND RECEIVER REAR PANEL VIEW Buttons Reset Press the “RESET” button to re
7 REMOTE CONTROL Remove the plastic film before using the remote control Remote Controller Sleep The devices will be ready while this button
8 Step 1 Connect the 60GHz WirelessHD Transmitter with an HDMI cable to an input source, such as a computer or a DVD player. Step 2 Conne
Comments to this Manuals