1 USER GUIDE WIRELESS USB HUB AND ADAPTER KIT/ WIRELESS USB DEVICE ADAPTER KIT Model: 2957
9 IMPORTANT NOTE: • If installing on Windows XP, Service Pack 2 (SP2) is required. Verify that this has been installed before installing the Wirel
10 This will take you to the TruLink Wireless USB Kit InstallShield Wizard. Click “Next” to go to proceed with the install. Read and ac
11 After the software installs your installation is complete and you can hit the “Finish” button to exit the wizard. Important: reboot/restart if
12 The Wireless USB Manager will open and instruct you on what to do next. 2. Make sure the antenna is connected to the Wireless U
13 Windows will automatically install the appropriate Wireless USB Host Adapter drivers and you will get a Successful Install message pop-up such as
14 Step 3 – Driver Installation for the Wireless USB Hub 1. Make sure the antenna is connected to the Wireless USB Hub. 2. Plug the supplied power a
15 You can now connect your USB enabled devices to the Wireless USB Hub (1-port as shown below) just as you would to your computer. Your devices wil
16 WIRELESS USB MANAGER The Wireless USB Manager is simple and easy to use interface to manage your Wireless USB devices and control your Wireless US
17 The VIEW menu will give the option of what type of devices you wish to display (All Devices, Connected Devices and Not Connected Devices). The OP
18 Figure: Host Settings - General To manage the Wireless USB Host Adapter settings, either select “Host Settings” in the “Option” menu of the Wirele
1 Introduction...
19 Figure: Host Settings - Advanced ADVANCED TAB (Figure: Host Settings – Advanced) 1. Channel selection: this function allows you to set manually a
20 USING YOUR WIRELESS USB HUB IN WIRED MODE Your Wireless USB Hub can also be used wired mode. Make sure the position of the WIRELESS/WIRED switch i
21 Operating System Support Microsoft XP 32-bit; Microsoft Vista 32-bit PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mb
22 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience
23 ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this man
24 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful i
25 CABLE ASSOCIATION WITH OTHER DEVICES ASSOCIATION CONCEPT In order to establish a secure wireless connection, both the Wireless USB Host Adapter
26 Figure: Cable Association CABLE ASSOCIATION PROCEDURE Cable association steps: Examples/Figures shown used with the association of the TruLink W
27 Figure: Wireless VGA Adapter and TruLink Hub Connected Associated Wireless USB Device Adapters will appear as icons in the Wireless USB Manager.
28 Figure: Discovery Mode Screen PIN ASSOCIATION PROCEDURE Pin association steps: Examples/Figures shown used with the association of the TruLink W
2 Thank you for purchasing the TruLink™ Wireless USB Hub and Adapter Kit. This product utilizes the latest in wireless technology, so you can connec
29 Figure: Discovery Mode in Process Figure: Pin Association Entry 2. The Wireless USB Host will search for any available Wireless VGA Adapter within
30 4. Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless VGA Adapter and Wireless USB Host Adapter a
31 3. Make sure the WIRELESS/WIRED switch on your Wireless VGA Adapter is in the WIRELESS position and the power cable is plugged in your Wireless
32 4. Click Install this driver software anyway. 5. To change pin, click “Change PIN” APPENDIX
33 6. Enter a 4-Digit PIN (0-9) and click OK. 7. If your PIN is valid, a Window displaying your new PIN will appear. Press OK. Your PIN
34 For more information on this product or to check for updated drivers, manuals or frequently asked questions
3 Full support for printers, scanners, cameras, MP3 players, external hard drives, and other USB peripherals Access and device-sharing support f
4 Microsoft® Windows® XP or Microsoft® Vista® 32-bit SYSTEM REQUIREMENTS
5 Wireless USB Host Adapter for your computer Wireless USB Hub for your USB devices Two (2) Dipole Antennas (for USB Adapter and USB Hub) 3ft
6 1 2 WIRELESS USB HOST ADAPTER 1. Link: Data Connection Indicator • LED is solid when transfer device is connected • LED blinks when data is bein
7 1 WIRELESS USB HUB (4-PORT)-29570 1. PWR: Power Indicator • LED is solid when power is applied 2. 1-2-3-4: USB Status Indicator • Illuminated num
8 123 45 WIRELESS USB DEVICE ADAPTER (1-PORT)-29571 1. PWR: Power Indicator • LED is solid when power is applied. 2. PWR plug • Power adapter sock
Comments to this Manuals